Lenovo ThinkServer RD350G User Manual And Hardware Maintenance Manual page 153

14. Disconnect all cables from the system board.
1
15. Lift the release pin
move the system board to the front of the server and carefully pivot the system board upward to remove
it out of the chassis.
Note: Carefully handle the system board by the release pin
Figure 116. Removing the system board
16. Place the old system board on a clean, flat, and static-protective surface. Touch the static-protective
package that contains the new system board to any unpainted surface on the outside of the server.
Then, take the new system board out of the package.
2
and the lifting handle to disengage the system board from the chassis. Then,
1
and the lifting handle
.
Chapter 6 Replacing hardware
2
.
139