Lenovo ThinkServer RD350G User Manual And Hardware Maintenance Manual page 88

Installing the RAID 110i key
your
page and
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
Note: Use any documentation that comes with the RAID 110i key and follow those instructions in addition to
the instructions in this topic.
To install the RAID 110i key, do the following:
1. Remove all external media from the drives and turn off all attached devices and the server. Then,
disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the server.
2. Prepare your server. See "Removing or extending the server from the rack cabinet" on page 57.
3. Remove the server cover. See "Removing the server cover" on page 57.
4. Touch the static-protective package that contains the RAID 110i key to any unpainted surface on the
outside of the server. Then, take the RAID 110i key out of the package.
Note: Carefully handle the RAID 110i key by its edges.
5. Locate the RAID upgrade key connector on the system board and then insert the RAID 110i key into the
RAID upgrade key connector on the system board.
Figure 34. Installing the RAID 110i key
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation, go to "Completing the parts replacement" on page 142.
Removing the RAID 110i key
your
page and
74
ThinkServer RD350G User Guide and Hardware Maintenance Manual
page
page
eading and
eading and