Lenovo ThinkServer RD350G User Manual And Hardware Maintenance Manual page 133

Replacing a 2.5-inch drive from a 3.5-inch hard-disk-drive bay
your
page and
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
To replace a 2.5-inch drive from a 3.5-inch hard-disk-drive bay, do the following:
1. Locate the appropriate hard-disk-drive bay. See "Front view of the server" on page 17.
2. Press the release button
Figure 91. Opening the handle of the 3.5-inch drive bracket
3. Pull the handle and carefully slide the bracket with the 2.5-inch drive out of the front of the chassis.
Figure 92. Removing the bracket with the 2.5-inch drive
page
1
to open the handle of the 3.5-inch drive bracket.
eading and
Chapter 6
119
.
Replacing hardware