Product Overview; Controls - Toro Greensmaster eFlex 2120 Series Operator's Manual

Product Overview

Figure 23
1. Operator-presence control
2. Traction and reel drive
engagement lever
3. Handle
4. Service brake
5. Battery pack
g017155
6. Grass basket
7. Cutting unit
8. Transport wheels
9. Electric motor

Controls

1. Open space for optional
lights
2. Parking-brake latch
3. Service brake
4. Handle
5. Operator-presence control 10. Traction and reel-drive
EZ-Turn Switch
The EZ-Turn switch
disables the EZ-Turn feature. The EZ-Turn feature
automatically slows the machine whenever you raise
the cutting unit off the ground during mowing. This
allows you to make the turns at the end of each
mowing pass at a slower speed. You can use the
switch at any time, even while mowing.
This feature only reduces the ground speed when the
reel is engaged and lifted off the ground. It has no
effect on ground speed when the reel is disengaged.
If this feature is activated while mowing and you turn
off the reel, the machine will speed up. If you are
mowing at a slow speed already, the EZ-Turn feature
will not slow the machine on a turn.
Service Brake
The service brake (Figure
front side of the handle. Pulling back the lever applies
the service brake.
You must disengage the brake before you engage the
traction drive. If you operate the machine with the
brake engaged, the machine moves, but with a high
resistance and increased power consumption.
17
Figure 24
6. EZ-Turn switch
7. InfoCenter LCD display
8. Key switch
9. Speed control
engagement lever
(Figure 24) enables or
25) is located on the left
g226765