Installing The Grass Basket; Breaking In The Machine - Toro Greensmaster eFlex 2120 Series Operator's Manual

9

Installing the Grass Basket

Parts needed for this procedure:
1 Grass basket
Procedure
1. Grasp the basket by the handle.
2. Guide the basket lip between the cutting unit
side plates and over the front roller
Figure 21
1. Basket hooks
3. Install the basket hooks over the frame loop
(Figure 21).
Important:
If you ever drop the basket, examine
the pitch-arm contact points near the lower lip
of the basket for damage
them before using the basket.
Using the basket with bent pitch-arm contact
points may cause contact between the basket
and cutting unit, causing undesired noise and/or
damage to the basket and cutting unit.
(Figure 21).
g017245
(Figure 22). Straighten
1. Pitch-arm contact point
10

Breaking in the Machine

No Parts Required
Procedure
Only 8 hours of mowing operation is required for the
break-in period.
Since the first hours of operation are critical to future
dependability of the machine, monitor the machine
functions and performance closely so that minor
difficulties, which could lead to major problems, are
noted and can be corrected. Inspect the machine
frequently during break-in for signs of loose fasteners
or any other malfunction.
16
Figure 22
g032408