Specifications; Attachments/Accessories; Before Operation; Before Operation Safety - Toro Greensmaster eFlex 2120 Series Operator's Manual

Specifications

Note:
Specifications and design are subject to
change without notice.
1820 Traction Unit
Width
82.5 cm (32–1/2 inches)
Height 104.8 cm (41–1/4 inches)
Length with basket 152.4 cm (60 inches)
Net Weight (with 11 129.3 kg (285 lb)
blade cutting unit
and grass basket
installed)
Width of cut 46 cm (18 inches)
Height of cut 1.5 to 7.5 mm (1/16 to 19/64 inches)
with Micro-Cut bedknife
Clip frequency Adjustable (Refer to Cutting Unit
Operator's Manual)
2120 Traction Unit
Width 90.1 cm (35–1/2 inches)
Height 104.8 cm (41–1/4 inches)
Length with basket 152.4 cm (60 inches)
Net Weight (with 11 132.9 kg (293 lb)
blade cutting unit
and grass basket
installed)
Width of cut 53.3 cm (21 inches)
Height of cut 1.5 to 7.5 mm (1/16 to 19/64 inches)
with Micro-Cut bedknife
Clip frequency Adjustable (Refer to the Cutting Unit
Operator's Manual)

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
Operation
Note:
Determine the left and right sides of the
machine from the normal operating position.

Before Operation

Before Operation Safety

General Safety
•
Never allow children or untrained people to
operate or service the machine. Local regulations
may restrict the age of the operator. The owner
is responsible for training all operators and
mechanics.
•
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
Know how to shut off the machine quickly.
•
Check that operator-presence controls, safety
switches, and shields are attached and functioning
properly. Do not operate the machine unless they
are functioning properly.
•
Inspect the area where you will use the machine,
and remove all objects that could interfere with
the operation of the machine or that the machine
could throw.
•
Evaluate the terrain to determine what accessories
and attachments are needed to properly and
safely perform the job.
Performing Daily
Maintenance
Perform the daily maintenance procedures; refer to
Maintenance (page
21
32).