After Operation; After Operation Safety; Transporting The Machine; Maintaining The Lithium Ion Battery Pack - Toro Greensmaster eFlex 2120 Series Operator's Manual

Traction unit
Hide thumbs Also See for Greensmaster eFlex 2120 Series:
Table of Contents

Advertisement

Figure 38
Traction and Reel-Drive Lever Positions
1. N
EUTRAL
2. Traction—N
and
EUTRAL
reel drive—D
ISENGAGE
3.
Move the lever to the traction—N
reel drive—D
ISENGAGE
4.
Move the lever to the traction—F
and reel drive—E
increase the throttle speed until the machine is
traveling at the desired ground speed, drive the
machine onto the green, lower the cutting unit to
the ground, and begin mowing.
Preparing to Transport the
Machine after Mowing
1.
Drive off the green, reduce the speed to the
Z
position, move the traction and reel drive
ERO
lever to the N
EUTRAL
machine.
2.
Empty the grass basket of clippings and install
the grass basket on the mower.
3. Traction—F
ORWARD
(transport)
4. Traction—F
ORWARD
reel drive—E
NGAGE
EUTRAL
position
(Figure
38).
ORWARD
position
(Figure
NGAGE
postion, and shut off the

After Operation

After Operation Safety

General Safety
Reduce the speed control before shutting off the
machine.
Clean grass and debris from the machine to help
prevent fires.

Transporting the Machine

After mowing, transport the machine away from the
job site; refer to
Distance (page 25)
Considerable Distance (page
Maintaining the Lithium Ion
Battery Pack
g000494
WARNING
The battery pack contains high voltage, which
could burn or electrocute you.
• Do not attempt to open the battery pack.
and
• Do not place anything in the connector
of the battery pack other than the wire
harness connector that came with the
and
product.
• Use extreme care when handling a battery
pack with a cracked case.
38),
• Use only the charger designed for the
battery pack.
Charging the Battery Pack
Charge the battery pack when you are finished
mowing for the day to ensure that it is fully charged for
the next day's mowing. Unlike other battery types,
lithium ion batteries do not have a charge memory
issue and do not need to be fully discharged before
charging them.
Refer to the Lithium Ion Battery Charger Operator's
Manual for detailed instructions on charging the
battery pack.
If you will be storing the mower for more than 10 days,
ensure that you place it on the charger and leave
the charger turned on. After 10 days of inactivity,
the charger automatically switches to storage mode,
during which it reduces and maintains the charge to
40% of the maximum charge. Refer to
Machine (page 42)
30
Transporting the Machine a Short
or
Transporting the Machine a
25).
for more information on storing the
Storing the

Advertisement

Table of Contents
loading

Table of Contents