Pre-Maintenance Procedures; Maintenance Safety; Disconnecting The Battery - Toro Greensmaster eFlex 2120 Series Operator's Manual

Pre-Maintenance
Procedures

Maintenance Safety

•
Disengage the drives and the cutting unit, engage
the parking brake, shut off the machine, and
remove the key. Wait for all movement to stop
before adjusting, cleaning, or repairing the
machine.
•
If the machine must be running to perform a
maintenance adjustment, keep your hands, feet,
clothing, and any parts of the body away from the
cutting unit, attachments, and any moving parts.
Keep bystanders away.
•
Keep all parts in good working condition and all
hydraulic fittings tight. Replace all worn, damaged,
or missing parts and decals. Keep all fasteners
tight to ensure that the machine is in safe working
condition.
•
Check the grass catcher components frequently
and replace them when necessary.
•
Clean grass and debris from the cutting unit,
drives, mufflers, and cooling screens to help
prevent fires.
•
Carefully release pressure from components with
stored energy.
•
If major repairs are ever needed or if assistance is
desired, contact an authorized Toro distributor.
•
To ensure optimum performance and continued
safety certification of the machine, use only
genuine Toro replacement parts and accessories.
Replacement parts and accessories made by
other manufacturers could be dangerous, and
such use could void the product warranty.

Disconnecting the Battery

Before performing maintenance on the machine,
disconnect the machine from the battery pack by
pulling the T-handle connector off the main power
supply connector (Figure
1. T-handle connector
34
39).
Figure 39
2. Main power supply
connector
g017237