Toro Greensmaster eFlex 2120 Series Operator's Manual page 28

Note:
The purpose of each button may change
depending on what is required at the time. Each
button has a label with an icon displaying its current
function.
Using the Menus
To access the InfoCenter menu system, press the
menu access button while at the main screen. This
brings you to the main menu. Refer to the following
tables for a synopsis of the options available from
the menus:
Main Menu
Menu Item Description
Faults The Faults menu contains a list of the recent
machine faults. Refer to the Service Manual
or your authorized Toro distributor for more
information on the Faults menu and the
information contained there.
Service The Service menu contains information on
the machine such as hours of use and battery
usage and status.
Diagnostics The Diagnostics menu lists various states
that the machine currently has. You can use
this to troubleshoot certain issues as it will
quickly tell you which machine controls are
on and which are off.
About The About menu lists the model number,
serial number, and software version of your
machine.
Settings The Settings menu allows you to customize
the InfoCenter display.
Service Menu
Menu Item Description
Hours Lists the total number of hours that the
machine has been turned on.
Mow Time Lists the total number of hours that the reel
has been turned on.
Power Use Lists the instantaneous power delivered by
the battery in watts.
Battery Charge Lists the current battery charge as a percent
of capacity.
Battery Current Lists the instantaneous current delivered by
the battery in amps.
Battery Volts Lists the battery potential in volts.
Energy Lists the total energy delivered by the battery
over its entire life in watt-hours.
Diagnostics Menu
Menu Item Description
Key On Indicates whether the key switch is in the on
or off.
Key Start Indicates whether the key switch is in the
S
TART
PBrake Latch Indicates whether the parking-brake latch is
on or off.
EZ Turn Indicates whether the EZ-Turn circuit is open
or closed.
Traction Indicates whether the traction lever is on or
off.
Reel Enable Indicates whether the reel is engaged or not.
Throttle Indicates the throttle control setting in volts
(used to calculate the target rpm).
Target rpm Lists the desired motor rpm as indicated by
the speed control setting.
Motor rpm Lists the actual motor rpm.
12V Supply Lists the sensor supply voltage #1 of the
controller.
5V Supply Lists the sensor supply voltage #2 of the
controller.
CAN Bus Lists the machine communication bus status.
About Menu
Menu Item Description
Model Lists the model number of the machine.
SN Lists the serial number of the machine.
S/W Rev Lists the revision number of the machine
software.
28
position or not..