Using The Infocenter Lcd Display - Toro Greensmaster eFlex 2120 Series Operator's Manual

Figure 35
1. Traction
engage/disengage
lever-engaged
2. Rotate the lever rearward to disengage the
transmission from the drum.
Important:
Push the lever from the front to
prevent your hand from being struck by the
spring loaded lever.
3. Move the machine as needed
Important:
If possible, do not tow the
machine. If it is absolutely necessary, do
not tow at any speed greater than 4.8 kph (3
mph); always disengage the transmission
from the drum. Failing to do so will likely
cause damage to the machine, especially the
electrical components.
4. When finished, rotate the lever forward to
engage the transmission to the drum.
Note:
The service brake is still operational with the
transmission disengaged from the drum.
g017247
2. Traction
engage/disengage
lever-disengaged
Using the InfoCenter LCD
Display
The InfoCenter LCD display shows information about
your machine such as the current battery charge, the
speed, various diagnostics, and other information
about the machine and the battery pack.
illustrates the InfoCenter and the main information
screen.
1. Power light/fault indicator
2. Battery charge indicator
3. Fault log indicator
4. Speed control setting
•
Power light/fault indicator—illuminates when you
turn the machine on. You can return the key to the
position when this light illuminates. This light
RUN
also blinks when there is a machine fault.
•
Battery charge indicator—when the battery has
a full charge, all of the boxes in the indicator will
be filled in with black. As power is used, boxes
will be filled with white starting from the right and
proceeding to the left as the battery drains. When
only 1 box is still black, the battery pack is almost
out of power and you should immediately proceed
to charge the battery.
•
Fault log indicator—this icon indicates that there is
a current fault log to review.
•
Speed control setting—the bars turn black from
left to right the faster you set the speed control.
When all bars are filled with white, the machine is
at zero speed.
•
Menu access/back button—press this button to
access the InfoCenter menus. You can also use it
to back out of any menu you are currently using.
•
Down button—use this button to scroll down
menus.
•
Right button—use this button to open a menu
where a right arrow indicates additional content.
27
Figure 36
Figure 36
5. Menu access/back button
6. Down button
7. Right button
g017282