Suzuki DL1000 Service Manual page 63

• Adjust the gearshift lever as shown.
! Gearshift lever height A
Standard: 20 – 30 mm (0.8 – 1.2 in)
• Install the engine sprocket.
• Apply THREAD LOCK SUPER "1303" to the engine sprocket
nut and tighten it to the specified torque while depressing the
brake pedal.
" Engine sprocket nut: 115 N·m (11.5 kgf-m, 83.0 lb-ft)
# 99000-32030: THREAD LOCK SUPPER "1303"
• Tighten the speed sensor rotor bolt to the specified torque.
" Speed sensor rotor bolt: 18 N·m (1.8 kgf-m, 13.0 lb-ft)
• Apply SUZUKI SUPER GREASE "A" to the push rod 1 and
install it.
• Install the clutch release cylinder.
$ 99000-25030: SUZUKI SUPER GREASE "A" (USA)
99000-25010: SUZUKI SUPER GREASE "A" (Others)
ENGINE 3-17