Suzuki DL1000 Service Manual page 135

Direction of outside
NOTE:
*The No.2 Driven plate should be installed between 4th to 7th
position from the clutch sleeve hub.
*Set the numbers of driven plate to the standard specifications
when replacing the driven plates with the new ones.
DRIVEN PLATE:
=
No.1 Driven plate...........5 – 8 pcs. (Standard: 7pcs.)
>
No.2 Driven plate...........1 – 4 pcs. (Standard: 2pcs.)
DRIVE PLATE:
)
No.1 Drive plate...........8 pcs.
*
No.2 Drive plate...........1 pc.
+
No.3 Drive plate...........1 pc.
)
No.1 Drive plate
CLUTCH COVER
• Install the gasket and dowel pins.
#
Use the new gasket to prevent oil leakage.
=
No.1 Driven plate
2.8 mm
12 mm
(0.11 in)
(0.47 in)
*
No.2 Drive plate
2.0 mm
(0.08 in)
>
No.2 Driven plate
3.7 mm
(0.15 in)
8.0 mm
(0.31 in)
+
No.3 Drive plate
ENGINE 3-89
2.3 mm
(0.09 in)
3.7 mm
(0.15 in)