Suzuki DL1000 Service Manual page 287

6-30 CHASSIS
• Install the washer.
NOTE:
When installing the washer, align the stopper lug to the groove
of the steering stem.
• Install the steering stem lock nut and tighten it to the specified
torque with the special tools.
# 09940-14911: Steering stem nut wrench
09940-14960: Steering stem nut wrench socket
& Steering stem lock nut: 80 N·m (8.0 kgf-m, 58.0 lb-ft)
• Reassemble the handlebar holders to the steering stem upper
bracket.
• Tighten the handlebar holder nuts to the specified torque.
& Handlebar holder nut: 45 N·m (4.5 kgf-m, 32.5 lb-ft)
NOTE:
Before tightening the nut to the specified torque, temporarily
install the handlebars in order to align both holders.
• Install the steering stem upper bracket and tighten the steer-
ing stem nut lightly.
• Install the ignition switch 1 and harness guide 2. (!7-31)
• Install the front fork to the steering stem and tighten the lower
clamp bolts temporarily.
• Tighten the steering stem head nut to the specified toupue.
& Steering stem head nut: 90 N·m (9.0 kgf-m, 65.0 lb-ft)
• Remount the front forks and the front fender. (!6-23)