Suzuki DL1000 Service Manual page 121

• Apply enough engine oil to the special tool and the bearings
and then set the special tool carefully.
• Gradually press in the bearing into the main journal bore by
using the hand-press until the special tool 1 stops the special
tool 2.
" 09913-60230: Journal bearing remover/installer
#
Use the new special tool A (09913-60230) for DL1000.
The tool A and B differ in length C.
NOTE:
Using the hand-press is recommended to install the crankshaft
journal bearings. However, the crankshaft journal bearings can
be installed by using the following special tools.
" 09924-84510: Bearing installer set
09924-74570: Final drive gear bearing
remover/installer
Hand-press
For DL1000
(09913-60230)
Bearing
For TL1000S/R
(09913-60210)
ENGINE 3-75
Bearing