Engine Coolant Temperature Meter And Indicator - Suzuki DL1000 Service Manual

ENGINE COOLANT TEMPERATURE METER
AND INDICATOR
• Disconnect the engine coolant temperature sensor coupler.
"
When connecting and disconnecting the engine cool-
ant temp. sensor lead wire coupler, make sure to turn
OFF the ignition switch, or electronic parts may get
damaged.
• Connect the variable resistor A between the terminals.
• Turn the ignition switch "ON".
• Check the display of engine coolant temperature meter as
shown below. If any abnormality is found, replace the combi-
nation meter with a new one.
Water temperateure
Resistance
Engine coolant
temperature meter
Water temperateure
Resistance
Engine coolant
temperature meter
Under 39 ˚C
More than
1.148 – 0.587 kΩ
1.148 kΩ
C H C
112 – 119 ˚C
0.140 – 0.116 kΩ
C C
H
60 – 99 ˚C
40 – 59 ˚C
0.587 – 0.188 kΩ
H C
Over 122 ˚C
Over 120 ˚C
Less than Less than
0.116 kΩ 0.111 kΩ
C
H
ELECTRICAL SYSTEM
Variable resister
100 – 111 ˚C
0.188 – 0.140 kΩ
H C
ON
H
7-25
Engine
coolant
temp.
sensor
H