Suzuki DL1000 Service Manual page 279

6-22 CHASSIS
• Install the fork spring.
NOTE:
The smaller end of the fork spring should be at the bottom of the
front fork.
FRONT FORK CAP BOLT
• Install the washer 1 and spacer 2.
• Adjust the height A of the inner rod threads by turning the
lock nut 3 as shown.
A: 10.5 mm (0.41 in)
• Tighten the front fork cap bolt to seat at lock nut by hand tight-
ening.
• Hold the front fork cap bolt, tighten the lock nut to the speci-
fied torque.
& Inner rod lock nut : 20 N·m (2.0 kgf-m, 14.5 lb-ft)
• Apply fork oil lightly to the O-ring.
"
Use a new O-ring to prevent oil leakage.
• Tighten the front fork cap bolt temporarily.