Reassembly And Remounting - Suzuki DL1000 Service Manual

REASSEMBLY AND REMOUNTING

Reassemble and remount the front fork in the reverse order of
removal and disassembly. Pay attension to the following points:
TUBE METALS AND SEALS
• Hold the inner tube vertically and clean the metal groove and
install the guide metal by hand as shown.
"
Use special care to prevent damage to the "Teflon"
coated surface of the guide metal when mounting it.
• Apply fork oil to the oil seal lip lightly before installing it.
• Assemble the following parts as shown.
1 Oil seal
2 Oil seal retainer
3 Guide metal
4 Dust seal
5 Oil seal stopper ring
6 Slide metal
"
* When installing the oil seal to outer tube, be careful
not to damage the oil seal lip.
* Do not use solvents for washing to prevent oil seal
damage.
* Apply fork oil to the Anti-friction metals and lip of the
oil seal.
* Make sure that the oil seal stopper ring 5 has been
fitted securely.
CHASSIS 6-19