Suzuki DL1000 Service Manual page 151

CAMSHAFT
• Rotate the generator rotor 720 degrees (2 turns) and align the
"F I T" line on the generator rotor with the index mark of the
valve timing inspection hole.
• Recheck the position of the engraved lines A on the front and
rear cam drive idle gears/sprockets.
NO.1 (FRONT) CAMSHAFTS
• At the above condition, install the No.1 (Front) camshafts,
intake and exhaust, in the following procedure.
No. 1 (Front) cylinder TDC of compression stroke
ENGINE 3-105
FRONT