Suzuki DL1000 Service Manual page 156

3-110 ENGINE
• After installing the No.2 (Rear) camshafts, rotate the genera-
tor rotor 360 degrees (1 turn), and recheck the positions of the
camshafts.
#
Be sure to check the positions of the "F I T" line A on
the generator rotor, engraved line B on the cam drive
idle gears/sprockets and the engraved line C on the
camshafts.
"E"
"I"
No. 1 (Front) cylinder TDC of compression stroke
"I"
"E"
FRONT