REMOVAL
HANDLEBARS
• Remove the handlebar balancer 1.
• Remove the brake/clutch lever covers 2.
NOTE:
Do not remove the handlebar balancer mounting screw before
removing the handlebar balancer. Slightly loosen the mounting
screw, and then pull the balancer assembly out of handlebars.
• Remove the rear view mirror 3.
• Disconnect the front brake light switch coupler 4.
• Remove the front brake master cylinder.
• Remove the right handlebar switch box 5 and throttle case
6.
• Disconnect the clutch switch lead wires 7.
• Remove the left handlebar switch box 8.
• Remove the rear view mirror 9.
• Remove the clutch master cylinder.
CHASSIS
6-25