Program Operation - Master E65-ERGOMETER User Manual

More About Workout Parameters
Setting
Parameter
Range
Time
0:00~ 99:00
Distance
0.00~999.0
Calories 0~9995
Watt 40~250
Age 10~99
Pulse 60~220

Program Operation

Manual（P1）
Program profile
Select "Manual " using UP OR DOWN KEY then press ENTER KEY. 1
will flash so value can be adjusted using UP OR DOWN KEY .Press ENTER KEY to save
value & move to next parameter to be adjusted.
**(If user sets up the target time to workout then the next parameter of Distance can
not be adjusted) Continue through all desired parameters, pressing START/STOP to start
workout.
Note: When any One of the workout parameters counts down to zero the console emits a
beep sound and the workout stops automatically. Press START KEY to continue the
workout to reach the unfinished workout goals set.
Pre-programs (P2~P13)
Program profile
Default Increment/
Value Decrement
00:00 ± 1:00
0.00 ±1.0
0.0 ±5
100 ±5
30 ±1
90 ±1
Description
1. When display is 0:00, Time will count
up.
2. When time is 1:00-99:00,
It will count down to 0.
1.When display is 0.0,
Distance will count up.
2.When Distance is 1.0~999.0, it will
count down to 0.
1.When display is 0, Calories will count
up.
2.When Calories is 5~9995,
it will count down to 0.
User can set watt value only in Watt
control program.
Target HR will be based on Age. When
Heart Rate exceeds Target H.R, the
number of Heart Rate will flash.
Setting Parameters for Target heart
rate.
EN
St
parameter, "Time"