Master E65-ERGOMETER User Manual page 76

Assembly Instructions
STEP 1 Front Stabilizer and Connecting Arm Assembly
4. Install the Front Stabilizer(14) on the front stabilizer holding plate at the bottom of
the main frame with the transportation wheels facing forward and secure them with
2pcs of 3/8" × 3" Carriage Bolts(77), 2pcs of 3/8" × 23m/m × 1.5T Curved
Washers(112) and 2pcs of 3/8" Cap Nuts(96) by using 13.14m/m Wrench(115).
5. Secure 2pcs slide wheel cover (65) on left and right pedal arm (5) with four M5 ×
15m/m Phillips Head Screws (82) by using Combination M5 Allen Wrench &
Phillips Head Screw Driver (118).
6. Insert the shaft on left connecting arm (7) to the bushing on left pedal arm (5) and
secure with 1pcs 5/16" × 15m/m Button Head Socket Bolt (80-1) together with
1pcs Ø8.7 × 20 ×1.5T
& Phillips Head Screw Driver (118). Do it the same way for right connecting arm (8)
and right pedal arm (5).
Flat Washer (104-1) by using Combination M5 Allen Wrench
EN