Master E65-ERGOMETER User Manual page 77

STEP 2 Console Mast Assembly
3. Use cable tie to guide the 1150m/m Computer Cable(36) through Console Mast(11)
and then pull out of the console holding plate, and Insert the console mast into
main frame and secure with 6pcs of 5/16" × 15m/m Button Head Socket Bolts(80),
6pcs of 5/16" × 1.5T Split Washers(111), 4pcs of 5/16" × 23m/m × 1.5T Flat
Washers(105) and 2pcs of 5/16" × 23m/m × 1.5T Curved Washers(113) by using
Combination M5 Allen Wrench & Phillips Head Screw Driver(118) .
4. Take off the cable tie which ties the Computer Cable(36) and plug in the
connectors of the Computer cable and the two Handpulse W/Cable Assemblies(40)
on the Console. Secure the Console on the Console Assembly(35) with 4pcs of
M5 × 10m/m Phillips Head Screws(84) by using Combination M5 Allen Wrench &
Phillips Head Screw Driver(118). Pay attention to Avoiding scratching the cables.
EN