Step 3 Handle Bar Assembly - Master E65-ERGOMETER User Manual

STEP 3 Handle Bar Assembly

3. Install the Lower Handle Bar (L) (9) in the left shaft of Console Mast(11) and the
Lower Handle Bar (R) (10) in the right shaft of Console Mast(11), and secure them
with 2pcs of 5/16" × 15m/m Hex Head Bolts(74) and 2pcs of Ø8.7 × 20m/m × 1.5T
Flat Washers(102) by using 12m/m Wrench(116).
4. Release rod end shafts (18) which are on left and right connecting arms. Connect
the connecting arm with lower handle bar and secure with rod end shafts (18) and
the screw by using Combination M5 Allen Wrench & Phillips Head Screw Driver
(118) and 12m/m_Wrench(116).
EN