Deleting A Program Block; Inserting And Editing Networks - Siemens SINUMERIK Series Operating Manual

Edit PLC user program (828D only)
23.5 View of the program blocks
23.5.8.3

Deleting a program block

You can delete program blocks.
Procedure
23.5.8.4

Inserting and editing networks

You can create a new network and then insert operations (bit operation, assignment, etc.) at
the selected cursor position.
The bit combinations comprise one or several logical operations and the assignment to an
output / bit memory.
If the cursor is moved further to the left with the arrow key, the type of assignment or a logic
operation can be selected. A further logic operation cannot be placed to the right of an
assignment. A network must always be terminated with an assignment.
Procedure
918
1. The relevant block is selected and the "Program Block" window is open.
2. Select the block and press "Delete".
5. Press "OK" to delete the block.
- OR -
Press "Cancel" to abort the action.
Machine manufacturer
Please observe the information provided by the machine manufacturer.
Machine manufacturer
Please observe the information provided by the machine manufacturer.
1. A block is selected.
2. Press the "Edit" softkey.
3. Position the cursor on a network.
4. Press the "Insert network" softkey.
- OR -
Press the <INSERT> key.
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
Milling