Siemens SINUMERIK Series Operating Manual page 841

Parameter
Direction of rotation
Z
X
K
I
PL
Milling
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
Description
Target position in the Z direction (abs and inc)
Target position in the X direction (abs and inc)
Center of the circle K (inc) - only if circle input via end point and center point
Note:
Incremental dimensions: The sign is also evaluated.
Center of circle I (inc) - only if circle input via end point and center point
Circle plane
● XY IJ
● YZ JK
● ZX KI
Working with Manual Machine
16.6 Simple workpiece machining
Unit
mm
mm
mm
mm
841