Viewing Pdf Documents - Siemens SINUMERIK Series Operating Manual

14.13

Viewing PDF documents

You have the option of displaying HTML documents, as well as PDFs, on all drives of the
program manager via the data tree of the system data.
Note
A preview of the documents is only possible for PDFs.
Procedure
Milling
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
1. In the "Program manager" operating area, select the desired storage me‐
dium.
- OR -
Select the desired storage location in the "Commissioning" operating
area in the data tree of the "System data".
2. Position the cursor on the PDF or the HTML file that you want to display,
and press the "Open" softkey.
The selected file is displayed on the screen.
The storage path of the document is displayed in the status bar. The
current page as well as the total number of pages of the document are
displayed.
3. Press the "Zoom +" or "Zoom -" softkey to enlarge of reduce the size of
the display.
4. Press the "Search" softkey if you want to search for specific texts in the
PDF.
5. Press the "View" softkey to change the representation of the PDF.
A new vertical softkey bar appears.
6. Press the "Zoom page width" softkey to display the document in full width
on the screen.
- OR -
Press the "Zoom page height" softkey to display the document with full
height on the screen.
- OR -
Press the "Rotate left" softkey to rotate the document through 90 degrees
to the left.
- OR -
Press the "Rotate right" softkey to rotate the document through 90 de‐
grees to the right.
Managing programs
14.13 Viewing PDF documents
783