Siemens SINUMERIK Series Operating Manual page 250

Machining the workpiece
6.13 Displaying G Functions and Auxiliary Functions
Group
G group 7
G group 8
G group 9
G group 10
G group 13
G group 14
G group 15
G group 16
G group 21
G group 22
G group 29
G group 30
Procedure
...
The G groups selection displayed in the "G Functions" window may differ.
References
For more information about configuring the displayed G groups, refer to the following document:
SINUMERIK Operate Commissioning Manual
250
Meaning
Tool radius compensation (e.g. G40, G42)
Settable work offset (e.g. G54, G57, G500)
Offset suppression (e.g. SUPA, G53)
Exact stop - continuous-path mode (e.g. G60, G641)
Workpiece dimensioning inches/metric (e.g. G70, G700)
Workpiece dimensioning absolute/incremental (G90)
Feedrate type (e.g. G93, G961, G972)
Feedrate override on inside and outside curvature (e.g. CFC)
Acceleration profile (e.g. SOFT, DRIVE)
Tool offset types (e.g. CUT2D, CUT2DF)
Radius/diameter programming (e.g. DIAMOF, DIAMCYCOF)
Compressor ON/OFF (e.g. COMPOF)
1. Select the "Machine" operating area.
2. Press the <JOG>, <MDA> or <AUTO> key.
3. Press the "G functions" softkey.
The "G Functions" window is opened.
4. Press the "G functions" softkey again to hide the window.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
Milling