Siemens SINUMERIK Series Operating Manual page 566

Programming technological functions (cycles)
10.4 Turning - milling/turning machine
Parameter
Z1
P1
X2 or X2α
Z2
P2
X3
Z3
LW
LR
H1
DP or αP
D1 or ND
rev
NN
VR
Multiple threads
566
Description
● Intermediate point 1 Z (abs) or
● Intermediate point 1 in relation to Z0 (inc)
Thread pitch 2 (unit as parameterized for P0)
● Intermediate point 2 X ∅ (abs) or
● Intermediate point 2 in relation to X1 (inc) or
● Thread taper 2
Incremental dimensions: The sign is also evaluated.
● Intermediate point 2 Z (abs) or
● Intermediate point 2 in relation to Z1 (inc)
Thread pitch 3 (unit as parameterized for P0)
● End point X ∅ (abs) or
● End point 3 in relation to X2 (inc) or
● Thread taper 3
● End point Z ∅ (abs) or
● End point with reference to Z2 (inc)
Thread run-in
Thread run-out
Thread depth
Infeed slope (flank) or infeed slope (angle)
● Infeed along a flank
● Infeed with alternating flanks
First infeed depth or number of roughing cuts - (only for ∇ and ∇ + ∇∇∇)
Finishing allowance in X and Z - (only for ∇ and ∇ + ∇∇∇)
Number of noncuts - (only for ∇∇∇ and ∇ + ∇∇∇)
Return distance
No
α0 Starting angle offset
Yes
N Number of thread turns
DA Thread changeover depth (inc)
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
Unit
mm
mm/rev
in/rev
turns/"
MODULUS
mm
Degrees
mm
mm/rev
in/rev
turns/"
MODULUS
mm
Degrees
mm
mm
mm
mm
mm or de‐
grees
mm
mm
mm
Degrees
mm
Milling