Modes Groups And Channels - Siemens SINUMERIK Series Operating Manual

Hide thumbs Also See for SINUMERIK Series:

Table of Contents

Setting up the machine

4.3 Operating modes

Selecting "Repos"

"MDI" mode (Manual Data Input)

In "MDI" mode, you can enter and execute G code commands non-modally to set up the

machine or to perform a single action.

Selecting "MDI"

In automatic mode, you can execute a program completely or only partially.

Select "AUTO"

"TEACH IN" operating mode

"TEACH IN" is available in the "AUTO" and "MDI" operating modes.

There you may create, edit and execute part programs (main programs or subroutines) for

motional sequences or simple workpieces by approaching and saving positions.

Selecting "Teach In"

Modes groups and channels

Every channel behaves like an independent NC. A maximum of one part program can be

processed per channel.

● Control with 1channel

One mode group exists.

● Control with several channels

Channels can be grouped to form several "mode groups."

Press the <REPOS> key.

Press the <MDI> key.

Press the <AUTO> key.

Press the <TEACH IN> key.

Operating Manual, 08/2018, 6FC5398-7CP41-0BA0