Displaying The Program Status - Siemens SINUMERIK Series Operating Manual

Shortcuts
- OR -
23.5.4

Displaying the program status

You can display the program status.
The following Information is displayed:
● Program status: "Run" or "Stop"
●
Displaying the program status
If your PLC has the "Progress status" function, the status values as well as the information
flow are displayed at the time of execution of the operations. The status of the local data
memory and the accumulators is also displayed.
The "Progress status" display is also controlled using the "Program stat." softkey
Colors for displaying the program status
In the progress status, different colors are used to display information.
Display
Signal flow of the busbar when the status is active
Signal flow in the networks
All operations that are active and that are executed without error (corresponds
to the signal flow)
Status of the Boolean operations (corresponds to the signal flow)
Timers and counters active
Error during execution
Milling
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
Status of the application area: "Sym" or "Abs"
Action
To the last field of the last network
Open the next program block in the same window
Open the previous program block in the same window
The function of the Select key depends on the position of the input focus.
● Table row: Displays the complete text row
● Network title: Displays the network comment
● Command: Displays all operands
If the input focus is positioned on a command, all operands including the
comments are displayed.
Edit PLC user program (828D only)
23.5 View of the program blocks
Color
Blue
Blue
Blue
Blue
Green
Red
909