Displaying Messages - Siemens SINUMERIK Series Operating Manual

Hide thumbs Also See for SINUMERIK Series:

Table of Contents

Displaying messages

PLC and part program messages may be issued during machining.

These message will not interrupt the program execution. Messages provide information with

regard to a certain behavior of the cycles and with regard to the progress of machining and

are usually kept beyond a machining step or until the end of the cycle.

Overview of messages

You can display all issued messages.

The message overview contains the following information:

● Message number

is only displayed for PLC messages

● Message text

Operating Manual, 08/2018, 6FC5398-7CP41-0BA0

Select the "Diagnostics" operating area.

Press the "Messages" softkey.

The "Messages" window appears.

Alarm, error, and system messages

15.3 Displaying messages