Major Components - Ricoh Beluga-C1 Training

Image Writing Unit
Drum
Development
Unit
Bypass
Tray
Upper Roll
Tray
Lower Roll
Tray
(optional)
Slide 116
The machine's layout is similar to the Dolphin-C2.
Important points about the major units are as follows:
Image writing unit: This is an assembly of three LED heads. Lasers are not
used.
Scanner: Uses a CIS that can scan in color
Fusing unit: Two lamps, and a pressure control system
Roll trays: These each contain two rolls. The lower tray is an optional unit. A
two-tray cassette unit can be installed instead of this optional roll tray unit.
Bypass tray: Can be used to feed cut sheets, one at a time.
The rollers, sensors, and other smaller components will be described in their
appropriate sections.

Major Components

116
Beluga-C1/C1.5 Training
Scanner
Fusing Unit