Front View - Ricoh Beluga-C1 Training

Slide 22

FRONT VIEW

Copy paper sources
Upper roll tray (item 7): Contains two paper rolls
Lower tray (item 9): Contains two paper cassettes or paper rolls. This tray is an
optional item.
Bypass feed tray (item 15): Use this to make a copy on a sheet of cut paper.
To copy on cut paper, you must use the bypass tray or the optional cassette
unit.
Copy exits
Front exit (item 5)
There is another exit at the rear. It will be shown on the next slide.
For recommendations on which exit to use, see the Operating Instructions.
Other items
Note the locations of the main power and operation switches (items 6 and 10).
Note the Scanner Stop key (item 11). Use this to stop scanning if the original
starts to skew. Also use it to release the original after it has been scanned.
Depending on a user tool setting, the scanner holds on to the trailing edge
of the original after scanning, to prevent it from falling and being damaged.
To release the trailing edge, press the Scanner Stop key.
Front View
Operating Instructions - About the Machine – Getting Started
22
Beluga-C1/C1.5 Training