Condensation Prevention - Ricoh Beluga-C1 Training

Condensation Prevention

The heaters are standard components, not options.
Four heaters for each tray.
One switch for each tray.
Default setting of the switch is off, to meet Energy Star standards
Slide 205
The main points are on the slide.
There are four heaters for each tray (total 8).
The heaters are standard components, not options.
The switches (circled in red) determine what happens when the main power is
off.
These switches are set to OFF before the machine leaves the factory. Each
switch is at the rear left corner of the tray. To switch the heaters on/off, open the
tray completely and push the switch.
Heater Switch Operation
OFF: Anti-condensation heaters OFF when main power switch is ON/OFF.
ON, Main Power SW OFF: The anti-condensation heaters turn on.
ON, Main Power SW ON: In standby mode and during copying, the anti-
condensation heaters are ON, but when both of the fusing lamps are on,
the anti-condensation heaters turn OFF.
205
Beluga-C1/C1.5 Training