Toner Supply - Ricoh Beluga-C1 Training

The machine controls toner the supply of toner to the
development unit by switching the toner supply clutch
on/off.
For copies shorter than 1250 mm (49.2 in.): Detect Supply
mode is used (this uses readings from the ID sensor).
For copies longer than 1250 mm (49.2 in.): The machine
automatically enters the "Long Print" mode.
Slide 182
No additional notes

Toner Supply

In Long Print mode, the machine uses Fixed Toner supply
mode (the readings of the ID sensor are ignored)
There are two types
» Drawing: Fixed supply of 3% (adjustable with SP 2208-5)
» Graphic: Fixed supply of 6% (adjustable with SP 2208-6)
» The default is 'Drawing' (change with SP 2208-7)
182
Beluga-C1/C1.5 Training