Guide To Components - Ricoh MP C4504 Start Manual

Getting Started

Guide to Components

1
1.
Power switch
See page A-17 "Color Controller Startup,
Shutdown, and Restart".
2.
Front side USB port
Port for installing system software, acti-
vating Fiery features, or printing from a
prepared USB flash drive.
3.
Power indicator
When Color Controller is operating, the
LED is lit.
4.
HDD access indicator
While Color Controller HDD is being ac-
cessed, the indicator flashes.
5.
Not used (monitor port)
6.
Not used (monitor port)
7.
Back side USB ports
Ports for installing system software, acti-
A-12
vating Fiery features, or printing from a
prepared USB flash drive.
8.
Network connector 10/100/1000Mbps
A port for connecting Color Controller to
a LAN.
9.
Network connector 10/100/1000Mbps
A port for connecting Color Controller to
the main unit.
10.
Power connector
11.
Main power switch
See page A-17 "Color Controller Startup,
Shutdown, and Restart".
12.
Service switches (for service use
only)
13.
LEDs (2-digit diagnostic display)
CWB002