Table of Contents
Advertisement
Auto Document Feeder (D578)
The Aim of Anti-tip Components and Precautions
The anti-tip components are necessary for meeting the requirements of IEC60950-1, the
international standard for safety.
The aim of these components is to prevent the products, which are heavy, from toppling as a
result of people running into or leaning on the products, which can lead to serious accidents such
as persons becoming trapped under the product.
(U.S.: UL60950-1, Europe: EN60950-1)
Therefore, removal of such components must always be with the consent of the customer.
Do not remove them at your own judgment.
2.5.2 INSTALLATION PROCEDURE
1.
Remove the strips of tape.
When unloading the ADF from a pallet, hold the front and rear sides of the ADF .
SM
2-19
C279
Advertisement
Chapters
Table of Contents
