Bypass Feed - Ricoh Beluga-C1 Training

Bypass feed sensor: Detects when a sheet of paper is
placed on the bypass table
Registration motor and registration clutch: Feed the paper
into the machine
The clutch switches off briefly so the user can adjust the
position of the paper.
This delay can be adjusted with SP1911.
Slide 196
The main points are on the slide.
There is no by-pass roller mechanism. The bypass feed sensor is just before the
registration roller.
When the bypass feed sensor detects the paper, the registration motor and
clutch feed the paper to the registration sensor.
When the paper reaches the registration sensor, the machine makes a beep.
If there is no beep, the paper didn't reach the sensor.
The paper stops at the registration sensor so that the user can adjust the
position of the paper.
The delay can be adjusted with SP 1911.

Bypass Feed

196
Beluga-C1/C1.5 Training