Transporting The Machine - Ricoh Beluga-C1 Training

Transporting the Machine

Disconnect the copier from the roll feeder or table.
Move the cleaning blade lever left (transportation position).
Move the blade right again before you let the customer use
the machine.
After moving the machine to a new location, always re-
install the leveling shoes under the casters of the machine.
Slide 114
If you move the machine a short distance within the same room, it is not
necessary to do these things. But, after installation, if you move it a long distance
(for example, between a warehouse and the customer location), you must do the
two steps on the slide.
Service manual, Safety/Conventions/Trademarks, Special
114
Beluga-C1/C1.5 Training
Instructions, Moving the Copier