Table of Contents
Advertisement
*
: Automatic buzzer mute function is disabled. (P.261) The distance segments will
blink slowly.
Approximate distance to object: Less than 30 cm (1.0 ft.)
Multi-information display (Example:
*
: Automatic buzzer mute function is disabled. (P.261) The distance segments will
blink rapidly.
■
Buzzer operation and dis-
tance to an object
A buzzer sounds when the sensors
are operating.
The buzzer beeps faster as the
vehicle approaches an object.
When the vehicle comes within
approximately 30 cm (1.0 ft.) of
the object, the buzzer sounds
continuously.
When 2 or more objects are
detected simultaneously, the
buzzer sounds for the nearest
object. If one or more objects
come within approximately 30
cm (1.0 ft.) of the vehicle, the
buzzer will repeat a long tone,
followed by fast beeps.
Automatic buzzer mute function:
After a buzzer begins sounding,
if the distance between the vehi-
cle and the detected object does
not become shorter, the buzzer
will be muted automatically.
(However, if the distance
between the vehicle and object is
COROLLA HV_ 国瑞 _GE
COROLLA HYBRID_OM_General_OM12M44E
4-5. Using the driving support systems
*
7-inch display)
*
Head-up display
30 cm (1.0 ft.) or less, this func-
tion will not operate.)
■
Adjusting the buzzer volume
The buzzer volume can be adjusted
on the multi-information display.
The volume of buzzers for the
Toyota parking assist-sensor and
RCTA function (if equipped) will be
adjusted simultaneously.
Use the meter control switches to
change settings. (P.102)
1
Press
or
to select
2
Press
or
to select
and then press and hold
3
Select the volume and then
press
.
Each time the switch is pressed, the
volume level will change between 1, 2
and 3.
■
Muting a buzzer
A mute button will be displayed on
the multi-information display when
an object is detected. To mute the
261
4
.
.
Advertisement
Table of Contents
