424
8-2. Steps to take in an emergency
5
Remove the valve cap from the
valve of the punctured tire.
6
Extend the hose. Remove the
air release cap from the hose.
You will use the air release cap again.
Therefore keep it in a safe place.
7
Connect the hose to the valve.
Screw the end of the hose clockwise as
far as possible.
COROLLA HV_ 国瑞 _GE
COROLLA HYBRID_OM_General_OM12M44E
8
Make sure that the compressor
switch is off.
9
Connect the power plug to the
power outlet socket. (P.338)
10Attach the sticker provided with
the tire puncture repair kit to a
position easily seen from the
driver's seat.
11Check the specified tire inflation
pressure.
Tire inflation pressure is specified on
the label on the driver's side pillar as