254
4-5. Using the driving support systems
turn on/off the function.
1
Press
Blind Spot Monitor operation
■
Vehicles that can be detected by the Blind Spot Monitor
The Blind Spot Monitor uses rear side radar sensors to detect the following
vehicles traveling in adjacent lanes and advises the driver of the presence
of such vehicles via the indicators on the outside rear view mirrors.
Vehicles that are traveling in areas that are not visible using the outside
rear view mirrors (the blind spots)
Vehicles that are approaching rapidly from behind in areas that are not
visible using the outside rear view mirrors (the blind spots)
■
The Blind Spot Monitor detection areas
The areas that vehicles can be detected in are outlined below.
The range of each detection area is:
Approximately 0.5 m (1.6 ft.) to 3.5 m (11.5 ft.) from either side of the
vehicle
Approximately 1 m (3.3 ft.) forward of the rear bumper
COROLLA HV_ 国瑞 _GE
COROLLA HYBRID_OM_General_OM12M44E
or
to select
*1
2
Press
or
.
and then press
to select
.