110
2-1. Instrument cluster
WARNING
■
When using the head-up display
Check that the position and bright-
●
ness of the head-up display image
does not interfere with safe driving.
Incorrect adjustment of the image's
position or brightness may obstruct
the driver's view and lead to an
accident, resulting in death or seri-
ous injury.
Do not continuously look at the
●
head-up display while driving as
you may fail to see pedestrians,
objects on the road, etc. ahead of
the vehicle.
NOTICE
■
Head-up display projector
●
Do not place any drinks near the
head-up display projector. If the
projector gets wet, electrical mal-
functions may result.
Do not place anything on or put
●
stickers onto the head-up display
projector.
Doing so could interrupt head-up
display indications.
●
Do not touch the inside of the
head-up display projector or thrust
sharp edges or the like into the pro-
jector.
Doing so could cause mechanical
malfunctions.
COROLLA HV_ 国瑞 _GE
COROLLA HYBRID_OM_General_OM12M44E
Using the head-up display
Select
on the multi-information
display (P.106) and then "HUD
Main".
■
Enabling/disabling the
head-up display
Press the
meter control switch
to enable/disable the head-up dis-
play.
■
Changing the head-up display
settings
Press and hold the
trol switch to change the following
settings:
Brightness and vertical position
of the head-up display
Select to adjust the brightness or verti-
cal position of the head-up display.
Display content
Select to change the display between
the following:
• No content
• Hybrid System Indicator
• Tachometer
Select to enable/disable the following
items:
• Route guidance to destination (if
equipped)
• Driving support system display (if
equipped)
• Compass (heading-up display) (if
equipped)
• Audio system operation status (if
equipped)
Display angle
meter con-