Table of Contents
Advertisement
2
To adjust the mirror, operate the
switch.
Up
Right
Down
Left
■
Mirror angle can be adjusted when
The power switch is in ACC or ON.
■
Linked mirror function when
reversing (if equipped)
When either "L" or "R" of the outside
rear view mirror switch is selected, the
outside rear view mirrors will automati-
cally angle downwards when the vehicle
is reversing in order to give a better view
of the ground.
To disable this function, select neither
"L" nor "R".
To set the mirror angle used when the
vehicle is reversing, adjust the mirror
angle at a desired position with the shift
position in R.
The adjusted angle will be memorized
and the mirror will automatically tilt to
the memorized angle whenever the shift
position is shifted to R from next time.
The memorized downward tilt position of
the mirror is linked to the normal position
(angle adjusted with the shift position in
other than R). Therefore, if the normal
position is changed after adjustment, the
tilt position will also change.
When the normal position is changed,
COROLLA HV_ 国瑞 _GE
COROLLA HYBRID_OM_General_OM12M44E
3-4. Adjusting the steering wheel and mirrors
readjust the angle in reversing.
Folding and extending the
mirrors
Manual type
Push the mirror back in the direc-
tion of the vehicle's rear.
Power type
Folds the mirrors
Extends the mirrors
Vehicles with automatic mode:
Putting the outside rear view mirror
folding switch in the neutral position
sets the mirrors to automatic mode.
Automatic mode allows the folding or
extending of the mirrors to be linked to
locking/unlocking of the doors.
149
3
Advertisement
Table of Contents
