Registering Id Codes - Toyota Corolla Hybrid 2020 Owner's Manual

378
7-3. Do-it-yourself maintenance
tire pressure warning light blinks
slowly 3 times.
5
Wait for a few minutes with the
power switch in ON and then
turn the power switch off.
■
Initialization procedure
● Make sure to carry out initialization
after adjusting the tire inflation pres-
sure.
Also, make sure the tires are cold
before carrying out initialization or tire
inflation pressure adjustment.
If you have accidentally turned the
●
power switch off during initialization, it
is not necessary to press the reset
switch again as initialization will
restart automatically when the power
switch is turned to ON the next time.
If you accidentally press the reset
●
switch when initialization is not neces-
sary, adjust the tire inflation pressure
to the specified level when the tires
are cold, and conduct initialization
again.
COROLLA HV_ 国瑞 _GE
COROLLA HYBRID_OM_General_OM12M44E
■
When initialization of the tire pres-
sure warning system has failed
Initialization can be completed in a few
minutes. However, in the following
cases, the settings have not been
recorded and the system will not oper-
ate properly. If repeated attempts to
record tire inflation pressure settings are
unsuccessful, have the vehicle
inspected by your Toyota dealer.
When operating the tire pressure
●
warning reset switch, the tire pressure
warning light does not blink 3 times.
After driving for a certain period of
●
time since the initialization has been
completed, the warning light comes
on after blinking for 1 minute.
WARNING
■
When initializing the tire pres-
sure warning system
Do not operate the tire pressure warn-
ing reset switch without first adjusting
the tire inflation pressure to the speci-
fied level. Otherwise, the tire pressure
warning light may not come on even if
the tire inflation pressure is low, or it
may come on when the tire inflation
pressure is actually normal.

Registering ID codes

The tire pressure warning valve
and transmitter is equipped with a
unique ID code. When replacing a
tire pressure warning valve and
transmitter, it is necessary to regis-
ter the ID code. Have the ID code
registered by your Toyota dealer.
■
Registering ID codes
The ID codes of the tire pressure warn-
ing valve and transmitters for two sets of
wheels can be registered.
It is not necessary to register the ID
codes when replacing normal tires with