Table of Contents
Advertisement
The intrusion sensor detec-
tion (if equipped)
■
The intrusion sensor detection
The intrusion sensor detects intrud-
ers or movement in the vehicle.
This system is designed to deter
and prevent vehicle theft but does
not guarantee absolute security
against all intrusions.
■
Setting the intrusion sensor
The intrusion sensor will be set
automatically when the alarm is set.
(P.81)
■
Canceling the intrusion sensor
If you are leaving pets or other
moving things inside the vehicle,
make sure to disable the intrusion
sensor before setting the alarm, as
they will respond to movement
inside the vehicle.
1
Turn the power switch off.
2
Press the intrusion sensor can-
cel switch.
Press the switch again to re-enable the
intrusion sensor.
Each time the intrusion sensor is
canceled/set, a message will be shown
on the multi-information display.
COROLLA HV_ 国瑞 _GE
COROLLA HYBRID_OM_General_OM12M44E
1-4. Theft deterrent system
■
Canceling and automatic re-ena-
bling of the intrusion sensor
The alarm will still be set even when
●
the intrusion sensor is canceled.
●
After the intrusion sensor is canceled,
pressing the power switch or unlock-
ing the doors using the entry function
or wireless remote control will re-ena-
ble the intrusion sensor.
The intrusion sensor will automatically
●
be re-enabled when the alarm system
is deactivated.
■
Intrusion sensor detection consid-
erations
The sensor may trigger the alarm in the
following situations:
People or pets are in the vehicle.
●
A window is open.
●
In this case, the sensor may detect the
following:
• Wind or the movement of objects such
as leaves and insects inside the vehi-
cle
• Ultrasonic waves emitted from
devices such as the intrusion sensors
of other vehicles
• The movement of people outside the
vehicle
●
Small insects such as moths or flies
83
1
Advertisement
Table of Contents
