Table of Contents
Advertisement
3
Replace the light bulb, and
install the bulb base.
Align the 3 tabs on the light bulb with
the mounting and insert.
4
Turn and secure the bulb base.
Shake the bulb base gently to check
that it is not loose, turn the headlights
on once and visually confirm that no
light is leaking through the mounting.
■
Front turn signal lights (bulb
type)
1
Turn the bulb base
counterclockwise.
COROLLA HV_ 国瑞 _GE
COROLLA HYBRID_OM_General_OM12M44E
7-3. Do-it-yourself maintenance
2
Remove the light bulb.
3
When installing, reverse the
steps listed.
■
Rear turn signal lights (bulb
type)
1
Open the trunk lid.
2
Insert a flathead screwdriver
between the cover and the light
assembly and pry up the cover
to disengage the claws (indi-
cated by a dotted line).
To prevent scratching the vehicle, wrap
the tip of the flathead screwdriver with a
cloth, etc.
395
7
Advertisement
Table of Contents
