Installing The Spare Tire - Toyota Corolla Hybrid 2020 Owner's Manual

WARNING
■
Replacing a flat tire
Do not touch the disc wheels or the
●
area around the brakes immedi-
ately after the vehicle has been
driven. After the vehicle has been
driven the disc wheels and the area
around the brakes will be extremely
hot. Touching these areas with
hands, feet or other body parts
while changing a tire, etc. may
result in burns.
● Failure to follow these precautions
could cause the wheel nuts to
loosen and the tire to fall off, result-
ing in death or serious injury.
• Never use oil or grease on the
wheel bolts or wheel nuts.
Oil and grease may cause the
wheel nuts to be excessively tight-
ened, leading to bolt or disc wheel
damage. In addition, the oil or
grease can cause the wheel nuts to
loosen and the wheel may fall off,
causing an accident and resulting in
death or serious injury. Remove any
oil or grease from the wheel bolts or
wheel nuts.
• Have the wheel nuts tightened with
a torque wrench to 103 N•m (10.5
kgf•m, 76 ft•lbf) as soon as possible
after changing wheels.
• Do not attach a heavily damaged
wheel ornament, as it may fly off the
wheel while the vehicle is moving.
• When installing a tire, only use
wheel nuts that have been specifi-
cally designed for that wheel.
• If there are any cracks or deforma-
tions in the bolt screws, nut threads
or bolt holes of the wheel, have the
vehicle inspected by your Toyota
dealer.
• When installing the wheel nuts, be
sure to install them with the tapered
ends facing inward. (P.381)
COROLLA HV_ 国瑞 _GE
COROLLA HYBRID_OM_General_OM12M44E
8-2. Steps to take in an emergency

Installing the spare tire

1
Remove any dirt or foreign mat-
ter from the wheel contact sur-
face.
If foreign matter is on the wheel contact
surface, the wheel nuts may loosen
while the vehicle is in motion, causing
the tire to come off.
2
Install the tire and loosely
tighten each wheel nut by hand
by approximately the same
amount.
When replacing a steel wheel with a
steel wheel (including a compact spare
tire), tighten the wheel nuts until the
tapered portion comes into loose
contact with the disc wheel seat
When replacing an aluminum wheel
with a steel wheel (including a compact
spare tire), tighten the wheel nuts until
the tapered portion
loose contact with the disc wheel seat
435
.
8
comes into