Table of Contents
Advertisement
390
7-3. Do-it-yourself maintenance
3
Remove the depleted battery
using a small flathead screw-
driver.
When removing the cover, the elec-
tronic key module may stick to the
cover and the battery may not be visi-
ble. In this case, remove the electronic
key module in order to remove the bat-
tery.
Insert a new battery with the "+" termi-
nal facing up.
4
When installing the key cover
and mechanical key, install by
conducting step
with the directions reversed.
5
Operate the
and check that the doors can be
locked/unlocked.
COROLLA HV_ 国瑞 _GE
COROLLA HYBRID_OM_General_OM12M44E
■
These parts are small and if swal-
lowed by a child, they can cause
choking. Keep away from children.
Failure to do so could result in death
or serious injury.
■
CAUTION
RISK OF EXPLOSION IF BATTERY
IS REPLACED BY AN INCORRECT
TYPE.
DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUC-
TIONS
■
Use a flathead screwdriver of appro-
priate size. Applying excessive force
may deform or damage the cover.
■
Observe the following precautions to
prevent accidents:
●
●
2
1
and step
●
or
switch
■
Do not forcibly remove the battery
cover, otherwise it may be damaged.
If the battery cover is difficult to
remove, lift the edge to remove it.
WARNING
Removed battery and other parts
Lithium battery precautions
NOTICE
When replacing the battery
For normal operation after
replacing the battery
Always work with dry hands.
Moisture may cause the battery to
rust.
Do not touch or move any other
component inside the remote con-
trol.
Do not bend either of the battery
terminals.
When removing the battery cover
(vehicles without a smart entry &
start system)
Advertisement
Table of Contents
